|
|
|
Product Description
ABS resin is one of the five synthetic resins, its impact resistance, heat resistance, low-temperature resistance, chemical resistance, and excellent electrical properties.
But also has easy processing and products with good size stability, surface gloss, easy painting, and coloring.
Also can undertake surface spraying, electroplating, metal welding, hot pressing and adhesion, and other secondary processing.
Properties:
1.Stable shrinkage, good dimensional stability, low warpage
2.Good processability
3.Balance mechanical properties
4.Good exterior, no need to be plated, sprayed
5.Flame resistant
Properties
|
Test Method
|
Test Condition
|
Units
|
Typical Values
|
Physical
|
Melt Flow Rate
|
ASTM D-1238
|
220ºC, 10Kg
|
g/10min
|
-
|
Specific Gravity
|
ASTM D-792
|
23ºC
|
g/cm3
|
1.03
|
Ash
|
-
|
800ºC,30min
|
%
|
-
|
Mechanical
|
Tensile Strength
|
ASTM D-638
|
50mm/min
|
MPa
|
46
|
Elongation at Break
|
ASTM D-638
|
50mm/min
|
%
|
14
|
Flexural Strength
|
ASTM D-790
|
2mm/min
|
MPa
|
62
|
Flexural Modulus
|
ASTM D-790
|
2mm/min
|
MPa
|
1800
|
Impact Strength, IZOD non-notched
|
ASTM D-256
|
23ºC
|
KJ/m2
|
-
|
|
|
-30ºC
|
KJ/m2
|
-
|
Impact Strength, IZOD notched
|
ASTM D-256
|
23ºC
|
KJ/m2
|
17
|
|
|
-30ºC
|
KJ/m2
|
-
|
Thermal
|
Heat Deflection Temp.
|
ASTM D-648
|
1.8Mpa
|
ºC
|
93
|
|
|
0.45Mpa
|
ºC
|
98
|
Others
|
Mold Shrinkage
|
ASTM D-955
|
23ºC
|
%
|
0.6-0.9
|
Flammability
|
UL94
|
1/16"
|
|
HB
|
ABS resin largest application areas are the automotive, electronics and building materials.
The automobile industry: Automotive instrument panels, exterior body panels, interior panels, steering wheel, panels, door locks, bumpers, ventilation tubes etc.
Electrical aspects: Widely used in refrigerators, televisions, washing machines, air conditioners, computers, copiers and other electronic appliances.
In 25kg PP woven bag, or per your requirement.
17mt/20'FCL
2.Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
3.Transportation:
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.
|
|
|